Spring machine SCM 08 equipped with a simple, braked prototype pay-off unit, type GHF 5, and an inline grinding machine, type FSA 2 from Böhm Elektronik. Economical inline machine with optional hose system for the transport of springs.

Simple setup of machine via the WAFIOS Assistant.
The Assistant helps the machine fitter to program the machine and automatically creates programs based on specified Record files.

CNC Transfer bending machine BQ 10  for the production of 2- and 3-dimensionally bent parts from tube material, round or flat wire or pre-processed blank parts at multiple processing stations. The modular-structured CNC wire bending machine has been designed for an operating range of 3-10 mm.

At the spring machine FMU 32+, WAFIOS shows the Modular Loop Concept (MLC) for the production of springs with German (machine) loops and English (crossover) loops. Moreover, the machine stands out by a high flexibility in the processing of different materials. Besides steel wire, also copper as well as high-strength wire can be processed.

New compression spring machine FUL 56+ with increased machine dynamics and higher feed speeds than the predecessor machine. With quick tool change system for reduced tooling downtimes.

myWAFIOS.ai helps operators with know-how about the machines and answers questions regarding problems
concerning e.g. setup, troubleshooting and retooling. The AI can be used on any mobile end device and uses information from WAFIOS operating instructions, tutorials etc.

Enhanced solution for a quick change of bending tools, e.g. the bending die. The simple changing process via a plug-in system does not require any tools and can be viewed at the tube bending machine TopBend 35.

Highest outputs by parallel processes with the spring machine MULTI-FMU 32. Due to modular-structured processing stations and a freely programmable transfer system, the machine can be configured project-specifically.

An automated solution
for the bending of different tube dimensions
"from part one" is shown
at the TWISTER² 35 RL.
In the magazine, the different tubes are detected by a camera and the corresponding bending program is selected automatically.

CNC technology for bending plastic tubes. The HotBend 35 uses a defined process of heating, bending, supporting and cooling for the production of prototypes. The tube is handled by a fully integrated robot.