Flexibel – Leistungsstark – Zuverlässig

Leistungsstarke, dynamische und vielseitige Maschinen für die Herstellung von Schenkelfedern aller Art. Die Baureihen FTU und FMU zeichnen sich durch hohe Zuverlässigkeit bei einfacher Bedienung aus. Mit einer Vielzahl von Ausstattungsmerkmalen, die an die spezifischen Anforderungen angepasst werden können, sind WAFIOS-Schenkelfedermaschinen ideal für die universelle Herstellung von Schenkelfedern.

Maschinenvergleich FMU-Baureihe

  • Herstellung komplexester Federgeometrien durch flexible Maschinenauslegung, u.a. durch Arbeiten in der zweiten Station
  • Sehr hohe Flexibilität und Bedienkomfort durch zahlreiche Optionen
  • Komfortable Programmierung komplexer Federgeometrien mit digitalen Werkzeugen zur Simulation, Ablaufoptimierung und Kollisionsvermeidung.
  • Hohe Qualitätsstandards sichern Nullfehlerproduktion, bei höchster Maschinenverfügbarkeit
  • Etabliertes, weltweit einzigartiges Maschinenkonzept

Bitte wählen Sie den Drahtdurchmesser [mm]

0.2 mm3.9 mm8 mm

FMU 08+ von 0.2
bis 0.8 mm

Drahtdurchmesser 0.2 - 0.8 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 120 m/min
Umschlaglänge max. 25 mm
Hub Vertikaltisch +40 / - 80 mm
Hub Horizontaltisch (optional) +/- 60 mm
Hub Längstisch (optional) 100 mm
Hub Lineareinheit ----
Hub Schieber 34 mm
Ausbaustufe max. CNC Achsen 20

FMU 16+ von 0.4
bis 1.6 mm

Drahtdurchmesser 0.4 - 1.6 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 140 m/min
Umschlaglänge max. 75 mm
Hub Vertikaltisch +60 / -100 mm
Hub Horizontaltisch (optional) +/- 80 mm
Hub Längstisch (optional) 110 mm
Hub Lineareinheit 320 mm
Hub Schieber 54 mm
Ausbaustufe max. CNC Achsen 24

FMU 20+ von 0.4
bis 2 mm

Drahtdurchmesser 0.4 - 2 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 140 m/min
Umschlaglänge max. 75 mm
Hub Vertikaltisch +60 / -100 mm
Hub Horizontaltisch (optional) +/- 80 mm
Hub Längstisch (optional) 110 mm
Hub Lineareinheit 320 mm
Hub Schieber 54 mm
Ausbaustufe max. CNC Achsen 24

FMU 25+ von 0.8
bis 2.5 mm

Drahtdurchmesser 0.8 - 2.5 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 125 m/min
Umschlaglänge max. 130 mm
Hub Vertikaltisch +70 / -120 mm
Hub Horizontaltisch (optional) +/- 90 mm
Hub Längstisch (optional) 180 mm
Hub Lineareinheit 400 mm
Hub Schieber 80 mm
Ausbaustufe max. CNC Achsen 24

FMU 32+ von 0.8
bis 3.2 mm

Drahtdurchmesser 0.8 - 3.2 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 125 m/min
Umschlaglänge max. 130 mm
Hub Vertikaltisch +70 / -120 mm
Hub Horizontaltisch (optional) +/- 90 mm
Hub Längstisch (optional) 180 mm
Hub Lineareinheit 400
Hub Schieber 95 mm
Ausbaustufe max. CNC Achsen 24

FMU 40+ von 1.8
bis 4 mm

Drahtdurchmesser 1.8 - 4 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 80 m/min
Umschlaglänge max. 200 mm
Hub Vertikaltisch +55 / -175 mm
Hub Horizontaltisch (optional) +/- 70 mm
Hub Axialtisch (optional) 260 mm
Hub Lineareinheit 750 mm
Hub Schieber 130 mm
Ausbaustufe max. CNC Achsen 24

FMU 50+ von 1.8
bis 5 

Drahtdurchmesser 1.8 - 5 
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 80 m/min
Umschlaglänge max. 200 mm
Hub Vertikaltisch +55 / -175 mm
Hub Horizontaltisch (optional) +/- 70 mm
Hub Axialtisch (optional) 260 mm
Hub Lineareinheit 750 mm
Hub Schieber 130 mm
Ausbaustufe max. CNC Achsen 24

FMU 65+ von 2.8
bis 6.5 mm

Drahtdurchmesser 2.8 - 6.5 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 70 m/min
Umschlaglänge max. 320 mm
Hub Vertikaltisch +55 / -175 mm
Hub Horizontaltisch (optional) +/- 100 mm
Hub Axialtisch (optional) 340 mm
Hub Lineareinheit ----
Hub Schieber 200 mm
Ausbaustufe max. CNC Achsen 24

FMU 80+ von 2.8
bis 8 mm

Drahtdurchmesser 2.8 - 8 mm
nach DIN-EN 10270  
Einzugsgeschwindigkeit max. 70 m/min
Umschlaglänge max. 320 mm
Hub Vertikaltisch +55 / -175 mm
Hub Horizontaltisch (optional) +/- 100 mm
Hub Axialtisch (optional) 340 mm
Hub Lineareinheit ----
Hub Schieber 200 mm
Ausbaustufe max. CNC Achsen 24

FMU 08+

  • Sehr hohe Flexibilität und Bedienkomfort durch zahlreiche Optionen
  • Komfortable Programmierung komplexer Federgeometrien
  • Hohe Qualitätsstandards sichern Nullfehlerproduktion
  • Hohe Maschinenverfügbarkeit
FMU08plus_-600x400pixel_300ppi.png

Weiterführende Informationen

L_AHP1-AHP6_Folder_V1-2_DE.pdf
AHP 1 - AHP 6 (Deutsch)

Download
(PDF, 428 KB)
L_AHP_Folder-AHP-Residual-Weight-Detection_V1-1_DE.pdf
AHP Residual-Weight-Detection (Deutsch)

Download
(PDF, 125 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_DE.pdf
AHT-Series (Deutsch)

Download
(PDF, 101 KB)
L_TC_Modular-Coiling-Set-MCS_V1-2_DE.pdf
Modulares Wicklerset – MCS Modular Coiler Set Kostenoptimierung durch Modularität (Deutsch)

Download
(PDF, 184 KB)
L_AHP_Folder-AHP-Residual-Weight-Detection_V1-1_EN.pdf
AHP Residual-Weight-Detection (Alle)

Download
(PDF, 125 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_EN.pdf
AHT-Series (Alle)

Download
(PDF, 102 KB)
L_FMU08_-32__Folder_V1-2_DE.pdf
FMU 08 (Deutsch)

Download
(PDF, 824 KB)
L_FMU08_-32__Folder_V1-2_EN.pdf
FMU 08 (Alle)

Download
(PDF, 824 KB)
L_FMU40_-FMU80__Folder_V1-1_DE.pdf
FMU 40 - FMU 80 (Deutsch)

Download
(PDF, 339 KB)
L_FMU40_-FMU80__Folder_V1-1_EN.pdf
FMU 40 - FMU 80 (Alle)

Download
(PDF, 340 KB)
L_FMU__iQspring_plusV1-2_DE.pdf
iQspring plus (Deutsch)

Download
(PDF, 1 MB)
L_FMU__iQspring__V1-2_EN.pdf
iQspring plus (Alle)

Download
(PDF, 1 MB)
L_H3-H3V-H7-Folder_DE.pdf
H3 - H3V - H7 (Deutsch)

Download
(PDF, 120 KB)
L_H3-H3V-H7_Folder_EN.pdf
H3 - H3V - H7 (Alle)

Download
(PDF, 120 KB)
L_TC_Adapter-for-FMU_V1-2_DE.pdf
Adapter für FMU-Schenkelfedermaschinen (Deutsch)

Download
(PDF, 290 KB)
L_TC_Adapter-for-FMU_V1-2_EN.pdf
Adapter for FMU Torsion Spring Machines (Alle)

Download
(PDF, 290 KB)
L_TC_Coating-Tooling_V1-1_DE.pdf
Probleme bei der Verarbeitung von Edelstahl? (Deutsch)

Download
(PDF, 87 KB)
L_TC_Coating-Tooling_V1-1_EN.pdf
Problems in the processing of stainless steel? (Alle)

Download
(PDF, 87 KB)
L_TC_Coiling-Wire-Guide-with-Insert_V1-2_DE.pdf
Windedrahtführung mit Einsatz - Kostenoptimierung duch Modularität (Deutsch)

Download
(PDF, 474 KB)
L_TC_Coiling-Wire-Guide-with-Insert_V1-2_EN.pdf
FMU 2.7 FMU 25 - Coiling plate holder with bending plate and plate for the erection of loops (Alle)

Download
(PDF, 477 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_DE.pdf
Einzugswalzen aus Werkstoff W01 und W03 – Auswahl mit System (Deutsch)

Download
(PDF, 124 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_EN.pdf
Feed rollers made of W01 and W03 material – system-based selection (Alle)

Download
(PDF, 123 KB)
L_TC_FMU16-20_CoilingPlateHolderBigSpringDiameter_V1-1_DE.pdf
L_TC_FMU16-20_CoilingPlateHolderBigSpringDiameter_V1-1_DE.pdf (Deutsch)

Download
(PDF, 158 KB)
L_TC_FMU16-20_CoilingPlateHolderBigSpringDiameter_V1-1_EN.pdf
FMU 1.7 FMU 16 (+) FMU 20 (+) Coiling plate holder for large wire diameters (Alle)

Download
(PDF, 157 KB)
L_TC_Folder-FMU17-16-Coiling-Plate-Holder_V1-1_DE.pdf
FMU 1.7, FMU 16 - Windeplattenhalter mit Biege- und Aufstellplatte (Deutsch)

Download
(PDF, 118 KB)
L_TC_Folder-FMU17-16-Coiling-Plate-Holder_V1-1_EN.pdf
FMU 1.7 FMU 16 - Coiling plate holder with bending plate and plate for the erection of loops (Alle)

Download
(PDF, 117 KB)
L_TC_Folder-FMU25-27-Coiling-Plate-Holder_V1-1_DE.pdf
FMU 2.7, FMU 25 - Windeplattenhalter mit Biege- und Aufstellplatte (Deutsch)

Download
(PDF, 118 KB)
L_TC_Folder-FMU25-27-Coiling-Plate-Holder_V1-1_EN.pdf
FMU 2.7 FMU 25 - Coiling plate holder with bending plate and plate for the erection of loops (Alle)

Download
(PDF, 117 KB)
L_TC_Modular-Coiling-Set-MCS_V1-2_EN.pdf
Modular Coiler Set – MCS Optimization of Costs through Modularity (Alle)

Download
(PDF, 185 KB)