Comparación de máquinas Serie FUL

  • Alto rendimiento productivo, mayor flexibilidad
  • Diseño conceptual de la máquina con visión de futuro, con configuración personalizable para todos los tipos de aplicación
  • El cómodo sistema de programación WPS 3.2 EasyWay aumenta la disponibilidad de la máquina
  • Unos estándares de calidad elevados garantizan una producción con cero fallos
  • Funciones iQ: mayor eficiencia gracias a un control inteligente del proceso

Por favor, seleccionar diámetro de alambre [mm]

0.12 mm14.94 mm30 mm

FUL 16+ de 0.12
a 0.8 mm

Diámetro de alambre 0.12 - 0.8 mm
Resistencia mecánica del alambre Rm=2600 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle max. 20 mm
Dirección de arrollado rechts und links
Velocidad de alimentación max. 260 m/min

FUL 26+ de 0.2
a 1.6 mm

Diámetro de alambre 0.2 - 1.6 mm
Resistencia mecánica del alambre Rm = 2300 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 45 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 240 m/min

FUL 26+ 4speed de 0.5
a 1.6 mm

Diámetro de alambre 0.5 - 1.6 mm
Resistencia mecánica del alambre Rm = 2300 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 45 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 600 m/min

FUL 36+ de 0.5
a 3 mm

Diámetro de alambre 0.5 - 3 mm
Resistencia mecánica del alambre Rm = 2300 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 65 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 220 m/min

FUL 36+ 4speed de 1
a 2.8 mm

Diámetro de alambre 1 - 2.8 mm
Resistencia mecánica del alambre Rm = 2300 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 65 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 500 m/min

FUL 46 de 0.9
a 4.5 mm

Diámetro de alambre 0.9 - 4.5 mm
Resistencia mecánica del alambre Rm = 2100 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 95 mm
Dirección de arrollado izquierda y opcionalmente derecha
Velocidad de alimentación máx. 175 m/min

FUL 56 de 1.5
a 5 mm

Diámetro de alambre 1.5 - 5 mm
Resistencia mecánica del alambre Rm = 2100 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 95 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 150 m/min

FUL 76 de 2.1
a 7.5 mm

Diámetro de alambre 2.1 - 7.5 mm
Resistencia mecánica del alambre Rm = 2200 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 140 mm
Dirección de arrollado derecha
Velocidad de alimentación 100 m/min máx.

FUL 86 de 3.1
a 8 mm

Diámetro de alambre 3.1 - 8 mm
Resistencia mecánica del alambre Rm = 2000 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 150 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 130 m/min

FUL 126 de 5.1
a 12 mm

Diámetro de alambre 5.1 - 12 mm
Resistencia mecánica del alambre Rm = 2200 N\mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 220 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación 100 m/min máx.

FUL 166 de 6.1
a 16 mm

Diámetro de alambre 6.1 - 16 mm
Resistencia mecánica del alambre Rm = 2000 N/mm²
Relación de enrollado ≥5
Diámetro exterior de muelle máx. 240 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 70 m/min

FUL 175 de 6.1
a 17 mm

Diámetro de alambre 6.1 - 17 mm
Resistencia mecánica del alambre Rm = 2000 N/mm²
Relación de enrollado ≥4
Diámetro exterior de muelle máx. 240 mm
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 70 m/min

FUL 183 de 8.1
a 18 mm

Diámetro de alambre 8.1 - 18 mm
Resistencia mecánica del alambre Rm = 2000 N/mm²
Relación de enrollado ≥5
Diámetro exterior de muelle máx. 300 mm
Dirección de arrollado derecha
Velocidad de alimentación máx. 70 m/min

FUL 203 de 8.1
a 20 mm

Diámetro de alambre 8.1 - 20 mm
Resistencia mecánica del alambre Rm = 2000 N/mm²
Relación de enrollado ≥5
Diámetro exterior de muelle máx. 300 mm
Dirección de arrollado derecha
Velocidad de alimentación máx. 65 m/min

FUL 226 de 12.1
a 30 mm

Diámetro de alambre 12.1 - 30 mm
Resistencia mecánica del alambre Rm = 800 N/mm²
Diámetro de alambre 12.1 - 22 mm
Resistencia mecánica del alambre Rm = 2000 N/mm²
Diámetro exterior de muelle máx. 300 mm
Relación de enrollado ≥4
Dirección de arrollado derecha y opcionalmente izquierda
Velocidad de alimentación máx. 65 m/min

FUL 16+

  • La máquina básica está equipada con 7 ejes CNC (máx. 8 ejes CNC)
  • Accionamiento directo de la alimentación, el eje de perfilado y el corte para una mayor precisión y producción de piezas (rendimiento productivo)
  • Potente alimentación con un par de rodillos de alimentación (opcionalmente, 2 pares)
  • Ajuste vertical del carro portamandriles y el dispositivo de desplazamiento del mandril con servomotor
  • Dispositivo de paso perpendicular y dispositivo de paso paralelo
  • Robusta unidad de corte con corte rotativo y recto
  • Dedo de arrollado PTP para la regulación de la precarga (opción)
  • Portadedo de arrollado con ajuste fino adicional
  • Mayor capacidad productiva gracias al nuevo modo de corte "Optimización 2"
FUL16plus_-400x400pixel_300ppi.png

Información adicional

L_AHP1-AHP6_Folder_V1-2_DE.pdf
AHP 1 - AHP 6 (Alemán)

Descarga
(PDF, 428 KB)
L_AHP_Folder-AHP-Residual-Weight-Detection_V1-1_DE.pdf
AHP Residual-Weight-Detection (Alemán)

Descarga
(PDF, 125 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_DE.pdf
AHT-Series (Alemán)

Descarga
(PDF, 101 KB)
L_FUL16-FUL166_V1-1_DE.pdf
FUL 16plus - FUL 166 (Alemán)

Descarga
(PDF, 1 MB)
L_FUL175_Folder-FUL175_V1-1_ALL.pdf
FUL 175 (Alemán)

Descarga
(PDF, 94 KB)
L_FUL226_V1-2_DE.pdf
FUL 226 (Alemán)

Descarga
(PDF, 590 KB)
L_FUL226_V1-2_EN.pdf
FUL 226 (Todos)

Descarga
(PDF, 590 KB)
L_FUL_iQopticut_V1-1_DE.pdf
iQopticut (Alemán)

Descarga
(PDF, 1 MB)
L_GH46_Pay-Off_V1-1__DE.pdf
GH 46 (Alemán)

Descarga
(PDF, 64 KB)
L_H3-H3V-H7-Folder_DE.pdf
H3 - H3V - H7 (Alemán)

Descarga
(PDF, 120 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_DE.pdf
Werkzeuglösungen für große Federwindemaschinen (Alemán)

Descarga
(PDF, 171 KB)
L_TC_TC-W46-Cutting-Mandrels-and-Cutters_V1-2_DE.pdf
Abschneidedorne aus Werkstoff W46 (Alemán)

Descarga
(PDF, 2 MB)
L_TC_Wafios-Torsion-Cut_V1-2_DE.pdf
WAFIOS Torsion Cut Werkzeugsystem (Alemán)

Descarga
(PDF, 591 KB)
L_AHP1-AHP6_Folder_V1-2_EN.pdf
AHP 1 - AHP 6 (Todos)

Descarga
(PDF, 426 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_EN.pdf
AHT-Series (Todos)

Descarga
(PDF, 102 KB)
L_F-Series_Folder-F-Series_V1-1_DE.pdf
F-Series (Alemán)

Descarga
(PDF, 776 KB)
L_F-Series_Folder-F-Series_V1-1_EN.pdf
F-Series (Todos)

Descarga
(PDF, 736 KB)
L_F30_Folder-F30_V1-1_DE.pdf
F30 (Alemán)

Descarga
(PDF, 298 KB)
L_F30_Folder-F30_V1-1_EN.pdf
F30 (Todos)

Descarga
(PDF, 297 KB)
L_FSE143_Folder-FSE143_V1-1_DE.pdf
FSE 143 (Alemán)

Descarga
(PDF, 348 KB)
L_FSE143_Folder-FSE143_V1-1_EN.pdf
FSE 143 (Todos)

Descarga
(PDF, 346 KB)
L_FUL-FSE_iQautopitch_V1-4_DE.pdf
iQautopitch (Alemán)

Descarga
(PDF, 1 MB)
L_FUL-FSE_iQautopitch_V1-4_EN.pdf
iQautopitch (Todos)

Descarga
(PDF, 1 MB)
L_FUL-FSE_iQspring2FUL_V1-2_DE.pdf
iQspring2FUL (Alemán)

Descarga
(PDF, 857 KB)
L_FUL-FSE_iQspring2FUL_V1-2_EN.pdf
iQspring2FUL (Todos)

Descarga
(PDF, 852 KB)
L_FUL-F_iQbestspeed_V1-3_DE.pdf
iQbestspeed (Alemán)

Descarga
(PDF, 1 MB)
L_FUL-F_iQbestspeed_V1-3_EN.pdf
iQbestspeed (Todos)

Descarga
(PDF, 1 MB)
L_FUL16-FUL166_V1-1_EN.pdf
FUL 16plus - FUL 166 (Todos)

Descarga
(PDF, 1 MB)
L_FUL26_-FUL36__V1-2_DE.pdf
FUL 26 - FUL 36 (Alemán)

Descarga
(PDF, 158 KB)
L_FUL26_-FUL36__V1-2_EN.pdf
FUL 26 - FUL 36 (Todos)

Descarga
(PDF, 158 KB)
L_FUL166_Folder-FUL166_V1-1_DE.pdf
FUL 166 (Alemán)

Descarga
(PDF, 259 KB)
L_FUL166_Folder-FUL166_V1-1_EN.pdf
FUL 166 (Todos)

Descarga
(PDF, 258 KB)
L_FUL175_Folder-FUL175_V1-1_ALL.pdf
FUL 175 (Todos)

Descarga
(PDF, 94 KB)
L_FUL183_Folder-FUL183_V1-1_DE.pdf
FUL 183 (Alemán)

Descarga
(PDF, 66 KB)
L_FUL183_Folder-FUL183_V1-1_EN.pdf
FUL 183 (Todos)

Descarga
(PDF, 65 KB)
L_FUL203_Folder-FUL203_V1-1_DE.pdf
FUL 203 (Alemán)

Descarga
(PDF, 66 KB)
L_FUL203_Folder-FUL203_V1-1_EN.pdf
FUL 203 (Todos)

Descarga
(PDF, 65 KB)
L_FUL226_V1-2_DE.pdf
FUL 226 (Alemán)

Descarga
(PDF, 590 KB)
L_FUL226_V1-2_EN.pdf
FUL 226 (Todos)

Descarga
(PDF, 590 KB)
L_FUL_iQcontrol_V1-4_DE.pdf
iQcontrol (Alemán)

Descarga
(PDF, 920 KB)
L_FUL_iQcontrol_V1-4_EN.pdf
iQcontrol (Todos)

Descarga
(PDF, 918 KB)
L_FUL_iQopticut_V1-1_EN.pdf
iQopticut (Todos)

Descarga
(PDF, 1 MB)
L_GH46_Pay-Off_V1-1_EN.pdf
GH46 (Todos)

Descarga
(PDF, 64 KB)
L_GH46_Pay-Off_V1-1__DE.pdf
GH 46 (Alemán)

Descarga
(PDF, 64 KB)
L_H3-H3V-H7-Folder_DE.pdf
H3 - H3V - H7 (Alemán)

Descarga
(PDF, 120 KB)
L_H3-H3V-H7_Folder_EN.pdf
H3 - H3V - H7 (Todos)

Descarga
(PDF, 120 KB)
L_TC_Coating-Tooling_V1-1_DE.pdf
Probleme bei der Verarbeitung von Edelstahl? (Alemán)

Descarga
(PDF, 87 KB)
L_TC_Coating-Tooling_V1-1_EN.pdf
Problems in the processing of stainless steel? (Todos)

Descarga
(PDF, 87 KB)
L_TC_Coiling-Pins-with-Insert_V1-2_DE.pdf
Windestifte mit Einsatz – Die flexible Alternative (Alemán)

Descarga
(PDF, 188 KB)
L_TC_Coiling-Pins-with-Insert_V1-2_EN.pdf
Coiling Pins with Insert - The Flexible Alternative (Todos)

Descarga
(PDF, 230 KB)
L_TC_Coiling-roller-with-holder_V1-2_EN.pdf
Coiling Roller with Mounting Fixture – The Alternative to Stationary Coiling Tools (Todos)

Descarga
(PDF, 190 KB)
L_TC_Cutting-Mandrel-W04_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Alemán)

Descarga
(PDF, 416 KB)
L_TC_Cutting-Mandrel-W04_V1-2_EN.pdf
Cutting Mandrels and Cutters Made of W04 Material (Todos)

Descarga
(PDF, 416 KB)
L_TC_Cutting-Mandrel-W46_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Alemán)

Descarga
(PDF, 364 KB)
L_TC_Cutting-Mandrel-W46_V1-2_EN.pdf
Cutting Mandrels Made of W46 Material (Todos)

Descarga
(PDF, 364 KB)
L_TC_Cutting-Tool-Holder-with-Insert_V1-3_DE.pdf
Messerhalter mit Einsatz – Rotationsschnitt (Alemán)

Descarga
(PDF, 251 KB)
L_TC_Cutting-Tool-Holder-with-Insert_V1-3_EN.pdf
Cutting Tool Holder with Insert – Rotary Cut (Todos)

Descarga
(PDF, 250 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_DE.pdf
Einzugswalzen aus Werkstoff W01 und W03 – Auswahl mit System (Alemán)

Descarga
(PDF, 124 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_EN.pdf
Feed rollers made of W01 and W03 material – system-based selection (Todos)

Descarga
(PDF, 123 KB)
L_TC_PKD_Coiling_Pins_V01-1_DE.pdf
Windestifte mit PKD – Edelstahldraht wirtschaftlich verarbeite (Alemán)

Descarga
(PDF, 985 KB)
L_TC_PKD_Coiling_Pins_V01-1_EN.pdf
Coiling Pins with PCD Insert - Processing Stainless Steel Wire Economically (Todos)

Descarga
(PDF, 978 KB)
L_TC_Regrinding-cutting-mandrels_V1-2_DE.pdf
RE-GRINDING lohnt sich- bis zu 70% Kostenersparnis ihr Nachschleifservice für Abschneidedorne (Alemán)

Descarga
(PDF, 282 KB)
L_TC_Regrinding-cutting-mandrels_V1-2_EN.pdf
RE-GRINDING pays off - Cost savings of up to 70% Your regrinding service for cutting mandrels (Todos)

Descarga
(PDF, 278 KB)
L_TC_RotaryRollerWireGuide_V1-1_DE.pdf
Drehbarer Rollendrahtführung – Optimiert für die Verarbeitung von Profildraht (Alemán)

Descarga
(PDF, 751 KB)
L_TC_RotaryRollerWireGuide_V1-1_EN.pdf
Rotary Roller Wire Guide - Optimized for Processing Profiled Wire (Todos)

Descarga
(PDF, 750 KB)
L_TC_Rotatable-Coiling-Insert-RCI_V1-2_DE.pdf
Drehbarer Windeeinsatz – RCI (Rotable Coiling Insert) (Alemán)

Descarga
(PDF, 505 KB)
L_TC_Rotatable-Coiling-Insert-RCI_V1-2_EN.pdf
Rotatable-Coiling-Insert-RCI (Todos)

Descarga
(PDF, 501 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_DE.pdf
Werkzeuglösungen für große Federwindemaschinen (Alemán)

Descarga
(PDF, 171 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_EN.pdf
Tool solutions for large spring coiling machines (Todos)

Descarga
(PDF, 188 KB)
L_TC_TC-W04-Cutting-Mandrels-and-Cutters_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Alemán)

Descarga
(PDF, 2 MB)
L_TC_TC-W04-Cutting-Mandrels-and-Cutters_V1-2_EN.pdf
Cutting Mandrels and Cutters Made of W04 Material (Todos)

Descarga
(PDF, 2 MB)
L_TC_TC-W46-Cutting-Mandrels-and-Cutters_V1-2_EN.pdf
Cutting Mandrels Made of W46 Material (Todos)

Descarga
(PDF, 2 MB)
L_TC_Wafios-Torsion-Cut_V1-2_DE.pdf
WAFIOS Torsion Cut Werkzeugsystem (Alemán)

Descarga
(PDF, 591 KB)
L_TC_Wafios-Torsion-Cut_V1-2_EN.pdf
WAFIOS Torsion Cut Tool System (Todos)

Descarga
(PDF, 610 KB)
L_TC_Winding-roller-with-holder_V1-2_DE.pdf
Winderolle mit Halter – die Alternative zu starren Windewerkzeugen (Alemán)

Descarga
(PDF, 190 KB)
L_TC_Winding-roller-with-holder_V1-2_EN.pdf
Coiling Roller with Mounting Fixture – The Alternative to Stationary Coiling Tools (Todos)

Descarga
(PDF, 190 KB)
L_FUL16plus_DE_V1-1.pdf
FUL 16+ (Alemán)

Descarga
(PDF, 3 MB)
L_FUL16plus_EN_V1-1.pdf
FUL 16+ (Todos)

Descarga
(PDF, 3 MB)
L_AHF50-150_V1-2_DE_HQ.pdf
AHF 50, AHF 150 (Alemán)

Descarga
(PDF, 1 MB)
L_AHF50-150_V1-2_EN_HQ.pdf
AHF 50, AHF 150 (Todos)

Descarga
(PDF, 1 MB)