Leistungsstarke Lösungen für Elektro-Antriebe

Hairpins sind Biegeteile aus isoliertem Kupferlackdraht. Sie werden in modernen Elektromotoren von Elektroautos, Hybridfahrzeugen und Elektrofahrrädern eingesetzt. Dort ersetzen sie die gewickelten Kupferspulen der klassischen Statoren. Hairpin-Motoren verbessern durch die höhere Packungsdichte des Profilmaterials das Leistungsgewicht.

Für die Herstellung von Hairpins bietet WAFIOS modernste Biegetechnologie für Kleinserien bis hin zur Großserienfertigung.

Maschinen

Maschinenvergleich FUL-Baureihe

  • Hohe Ausbringungsleistung, große Flexibilität
  • Zukunftsorientiertes Maschinenkonzept, individuell konfigurierbar für alle Anwendungsfälle
  • Komfortables Programmiersystem WPS 3.2 EasyWay erhöht Maschinenverfügbarkeit
  • Hohe Qualitätsstandards sichern Nullfehlerproduktion
  • iQ-Funktionen - Mehr Effizienz durch intelligente Prozesssteuerung

Bitte wählen Sie den Drahtdurchmesser [mm]

0.12 mm14.94 mm30 mm

FUL 16+ von 0.12
bis 0.8 mm

Drahtdurchmesser 0.12 - 0.8 mm
Drahtfestigkeit Rm=2600 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 20 mm
Winderichtung rechts und links
Einzugsgeschwindigkeit max. 260 m/min

FUL 26+ von 0.2
bis 1.6 mm

Drahtdurchmesser 0.2 - 1.6 mm
Drahtfestigkeit Rm=2300 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 45 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 240 m/min

FUL 26+ 4speed von 0.5
bis 1.6 mm

Drahtdurchmesser 0.5 - 1.6 mm
Drahtfestigkeit Rm=2300 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 45 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 600 m/min

FUL 36+ von 0.5
bis 3 mm

Drahtdurchmesser 0.5 - 3 mm
Drahtfestigkeit Rm=2300 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 65 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 220 m/min

FUL 36+ 4speed von 1
bis 2.8 mm

Drahtdurchmesser 1 - 2.8 mm
Drahtfestigkeit Rm=2300 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 65 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 500 m/min

FUL 46 von 0.9
bis 4.5 mm

Drahtdurchmesser 0.9 - 4.5 mm
Drahtfestigkeit Rm=2100 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 95 mm
Winderichtung links und optional rechts
Einzugsgeschwindigkeit max. 175 m/min

FUL 56 von 1.5
bis 5 mm

Drahtdurchmesser 1.5 - 5 mm
Drahtfestigkeit Rm=2100 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 95 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 150 m/min

FUL 76 von 2.1
bis 7.5 mm

Drahtdurchmesser 2.1 - 7.5 mm
Drahtfestigkeit Rm=2200 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 140 mm
Winderichtung rechts und links
Einzugsgeschwindigkeit max. 130 m/min

FUL 86 von 3.1
bis 8 mm

Drahtdurchmesser 3.1 - 8 mm
Drahtfestigkeit Rm=2000 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 150 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 130 m/min

FUL 126 von 5.1
bis 12 mm

Drahtdurchmesser 5.1 - 12 mm
Drahtfestigkeit Rm=2200 N\mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 220 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 100 m/min

FUL 166 von 6.1
bis 16 mm

Drahtdurchmesser 6.1 - 16 mm
Drahtfestigkeit Rm=2000 N/mm²
Wickelverhältnis ≥5
Federaussendurchmesser max. 240 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 70 m/min

FUL 175 von 6.1
bis 17 mm

Drahtdurchmesser 6.1 - 17 mm
Drahtfestigkeit Rm=2000 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 240 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 70 m/min

FUL 183 von 8.1
bis 18 mm

Drahtdurchmesser 8.1 - 18 mm
Drahtfestigkeit Rm=2000 N/mm²
Wickelverhältnis ≥5
Federaussendurchmesser max. 300 mm
Winderichtung rechts
Einzugsgeschwindigkeit max. 70 m/min

FUL 203 von 8.1
bis 20 mm

Drahtdurchmesser 8.1 - 20 mm
Drahtfestigkeit Rm=2000 N/mm²
Wickelverhältnis ≥5
Federaussendurchmesser max. 300 mm
Winderichtung rechts
Einzugsgeschwindigkeit max. 65 m/min

FUL 226 von 12.1
bis 30 mm

Drahtdurchmesser 12.1 - 30 mm
Drahtfestigkeit Rm=800 N/mm²
Drahtdurchmesser 12.1 - 22 mm
Drahtfestigkeit Rm=2000 N/mm²
Federaussendurchmesser max. 300 mm
Wickelverhältnis ≥4
Winderichtung rechts optional links
Einzugsgeschwindigkeit max. 65 m/min

FUL 16+

  • Grundmaschine mit 7 CNC-Achsen (max. 8 CNC-Achsen)
  • Direktantrieb an Einzug, Formachse und Schnitt für höhere Genauigkeit und Stückleistung (Produktionsleistung)
  • Kraftvoller Einzug mit 1 Paar Einzugswalzen (2 Paar Option)
  • Servomotorische Dornhöhenverstellung und Dornverschiebung
  • Steigung senkrecht und Steigung parallel
  • Robuste Schnitteinheit mit Rotations- und Geradschnitt
  • Vorspannungsregelung PTP-Windefinger CNC Achse (Option)
  • Windestifthalter mit zusätzlicher Feineinstellung
  • Erhöhte Leistung durch neue Schnittart „optimiert 2"
FUL16plus_-400x400pixel_300ppi.png

Weiterführende Informationen

L_AHP1-AHP6_Folder_V1-2_DE.pdf
AHP 1 - AHP 6 (Deutsch)

Download
(PDF, 428 KB)
L_AHP_Folder-AHP-Residual-Weight-Detection_V1-1_DE.pdf
AHP Residual-Weight-Detection (Deutsch)

Download
(PDF, 125 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_DE.pdf
AHT-Series (Deutsch)

Download
(PDF, 101 KB)
L_FUL16-FUL166_V1-1_DE.pdf
FUL 16plus - FUL 166 (Deutsch)

Download
(PDF, 1 MB)
L_FUL175_Folder-FUL175_V1-1_ALL.pdf
FUL 175 (Deutsch)

Download
(PDF, 94 KB)
L_FUL226_V1-2_DE.pdf
FUL 226 (Deutsch)

Download
(PDF, 590 KB)
L_FUL226_V1-2_EN.pdf
FUL 226 (Alle)

Download
(PDF, 590 KB)
L_FUL_iQopticut_V1-1_DE.pdf
iQopticut (Deutsch)

Download
(PDF, 1 MB)
L_GH46_Pay-Off_V1-1__DE.pdf
GH 46 (Deutsch)

Download
(PDF, 64 KB)
L_H3-H3V-H7-Folder_DE.pdf
H3 - H3V - H7 (Deutsch)

Download
(PDF, 120 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_DE.pdf
Werkzeuglösungen für große Federwindemaschinen (Deutsch)

Download
(PDF, 171 KB)
L_TC_TC-W46-Cutting-Mandrels-and-Cutters_V1-2_DE.pdf
Abschneidedorne aus Werkstoff W46 (Deutsch)

Download
(PDF, 2 MB)
L_TC_Wafios-Torsion-Cut_V1-2_DE.pdf
WAFIOS Torsion Cut Werkzeugsystem (Deutsch)

Download
(PDF, 591 KB)
L_AHP1-AHP6_Folder_V1-2_EN.pdf
AHP 1 - AHP 6 (Alle)

Download
(PDF, 426 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_EN.pdf
AHT-Series (Alle)

Download
(PDF, 102 KB)
L_F-Series_Folder-F-Series_V1-1_DE.pdf
F-Series (Deutsch)

Download
(PDF, 776 KB)
L_F-Series_Folder-F-Series_V1-1_EN.pdf
F-Series (Alle)

Download
(PDF, 736 KB)
L_F30_Folder-F30_V1-1_DE.pdf
F30 (Deutsch)

Download
(PDF, 298 KB)
L_F30_Folder-F30_V1-1_EN.pdf
F30 (Alle)

Download
(PDF, 297 KB)
L_FSE143_Folder-FSE143_V1-1_DE.pdf
FSE 143 (Deutsch)

Download
(PDF, 348 KB)
L_FSE143_Folder-FSE143_V1-1_EN.pdf
FSE 143 (Alle)

Download
(PDF, 346 KB)
L_FUL-FSE_iQautopitch_V1-4_DE.pdf
iQautopitch (Deutsch)

Download
(PDF, 1 MB)
L_FUL-FSE_iQautopitch_V1-4_EN.pdf
iQautopitch (Alle)

Download
(PDF, 1 MB)
L_FUL-FSE_iQspring2FUL_V1-2_DE.pdf
iQspring2FUL (Deutsch)

Download
(PDF, 857 KB)
L_FUL-FSE_iQspring2FUL_V1-2_EN.pdf
iQspring2FUL (Alle)

Download
(PDF, 852 KB)
L_FUL-F_iQbestspeed_V1-3_DE.pdf
iQbestspeed (Deutsch)

Download
(PDF, 1 MB)
L_FUL-F_iQbestspeed_V1-3_EN.pdf
iQbestspeed (Alle)

Download
(PDF, 1 MB)
L_FUL16-FUL166_V1-1_EN.pdf
FUL 16plus - FUL 166 (Alle)

Download
(PDF, 1 MB)
L_FUL26_-FUL36__V1-2_DE.pdf
FUL 26 - FUL 36 (Deutsch)

Download
(PDF, 158 KB)
L_FUL26_-FUL36__V1-2_EN.pdf
FUL 26 - FUL 36 (Alle)

Download
(PDF, 158 KB)
L_FUL166_Folder-FUL166_V1-1_DE.pdf
FUL 166 (Deutsch)

Download
(PDF, 259 KB)
L_FUL166_Folder-FUL166_V1-1_EN.pdf
FUL 166 (Alle)

Download
(PDF, 258 KB)
L_FUL175_Folder-FUL175_V1-1_ALL.pdf
FUL 175 (Alle)

Download
(PDF, 94 KB)
L_FUL183_Folder-FUL183_V1-1_DE.pdf
FUL 183 (Deutsch)

Download
(PDF, 66 KB)
L_FUL183_Folder-FUL183_V1-1_EN.pdf
FUL 183 (Alle)

Download
(PDF, 65 KB)
L_FUL203_Folder-FUL203_V1-1_DE.pdf
FUL 203 (Deutsch)

Download
(PDF, 66 KB)
L_FUL203_Folder-FUL203_V1-1_EN.pdf
FUL 203 (Alle)

Download
(PDF, 65 KB)
L_FUL226_V1-2_DE.pdf
FUL 226 (Deutsch)

Download
(PDF, 590 KB)
L_FUL226_V1-2_EN.pdf
FUL 226 (Alle)

Download
(PDF, 590 KB)
L_FUL_iQcontrol_V1-4_DE.pdf
iQcontrol (Deutsch)

Download
(PDF, 920 KB)
L_FUL_iQcontrol_V1-4_EN.pdf
iQcontrol (Alle)

Download
(PDF, 918 KB)
L_FUL_iQopticut_V1-1_EN.pdf
iQopticut (Alle)

Download
(PDF, 1 MB)
L_GH46_Pay-Off_V1-1_EN.pdf
GH46 (Alle)

Download
(PDF, 64 KB)
L_GH46_Pay-Off_V1-1__DE.pdf
GH 46 (Deutsch)

Download
(PDF, 64 KB)
L_H3-H3V-H7-Folder_DE.pdf
H3 - H3V - H7 (Deutsch)

Download
(PDF, 120 KB)
L_H3-H3V-H7_Folder_EN.pdf
H3 - H3V - H7 (Alle)

Download
(PDF, 120 KB)
L_TC_Coating-Tooling_V1-1_DE.pdf
Probleme bei der Verarbeitung von Edelstahl? (Deutsch)

Download
(PDF, 87 KB)
L_TC_Coating-Tooling_V1-1_EN.pdf
Problems in the processing of stainless steel? (Alle)

Download
(PDF, 87 KB)
L_TC_Coiling-Pins-with-Insert_V1-2_DE.pdf
Windestifte mit Einsatz – Die flexible Alternative (Deutsch)

Download
(PDF, 188 KB)
L_TC_Coiling-Pins-with-Insert_V1-2_EN.pdf
Coiling Pins with Insert - The Flexible Alternative (Alle)

Download
(PDF, 230 KB)
L_TC_Coiling-roller-with-holder_V1-2_EN.pdf
Coiling Roller with Mounting Fixture – The Alternative to Stationary Coiling Tools (Alle)

Download
(PDF, 190 KB)
L_TC_Cutting-Mandrel-W04_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Deutsch)

Download
(PDF, 416 KB)
L_TC_Cutting-Mandrel-W04_V1-2_EN.pdf
Cutting Mandrels and Cutters Made of W04 Material (Alle)

Download
(PDF, 416 KB)
L_TC_Cutting-Mandrel-W46_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Deutsch)

Download
(PDF, 364 KB)
L_TC_Cutting-Mandrel-W46_V1-2_EN.pdf
Cutting Mandrels Made of W46 Material (Alle)

Download
(PDF, 364 KB)
L_TC_Cutting-Tool-Holder-with-Insert_V1-3_DE.pdf
Messerhalter mit Einsatz – Rotationsschnitt (Deutsch)

Download
(PDF, 251 KB)
L_TC_Cutting-Tool-Holder-with-Insert_V1-3_EN.pdf
Cutting Tool Holder with Insert – Rotary Cut (Alle)

Download
(PDF, 250 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_DE.pdf
Einzugswalzen aus Werkstoff W01 und W03 – Auswahl mit System (Deutsch)

Download
(PDF, 124 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_EN.pdf
Feed rollers made of W01 and W03 material – system-based selection (Alle)

Download
(PDF, 123 KB)
L_TC_PKD_Coiling_Pins_V01-1_DE.pdf
Windestifte mit PKD – Edelstahldraht wirtschaftlich verarbeite (Deutsch)

Download
(PDF, 985 KB)
L_TC_PKD_Coiling_Pins_V01-1_EN.pdf
Coiling Pins with PCD Insert - Processing Stainless Steel Wire Economically (Alle)

Download
(PDF, 978 KB)
L_TC_Regrinding-cutting-mandrels_V1-2_DE.pdf
RE-GRINDING lohnt sich- bis zu 70% Kostenersparnis ihr Nachschleifservice für Abschneidedorne (Deutsch)

Download
(PDF, 282 KB)
L_TC_Regrinding-cutting-mandrels_V1-2_EN.pdf
RE-GRINDING pays off - Cost savings of up to 70% Your regrinding service for cutting mandrels (Alle)

Download
(PDF, 278 KB)
L_TC_RotaryRollerWireGuide_V1-1_DE.pdf
Drehbarer Rollendrahtführung – Optimiert für die Verarbeitung von Profildraht (Deutsch)

Download
(PDF, 751 KB)
L_TC_RotaryRollerWireGuide_V1-1_EN.pdf
Rotary Roller Wire Guide - Optimized for Processing Profiled Wire (Alle)

Download
(PDF, 750 KB)
L_TC_Rotatable-Coiling-Insert-RCI_V1-2_DE.pdf
Drehbarer Windeeinsatz – RCI (Rotable Coiling Insert) (Deutsch)

Download
(PDF, 505 KB)
L_TC_Rotatable-Coiling-Insert-RCI_V1-2_EN.pdf
Rotatable-Coiling-Insert-RCI (Alle)

Download
(PDF, 501 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_DE.pdf
Werkzeuglösungen für große Federwindemaschinen (Deutsch)

Download
(PDF, 171 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_EN.pdf
Tool solutions for large spring coiling machines (Alle)

Download
(PDF, 188 KB)
L_TC_TC-W04-Cutting-Mandrels-and-Cutters_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Deutsch)

Download
(PDF, 2 MB)
L_TC_TC-W04-Cutting-Mandrels-and-Cutters_V1-2_EN.pdf
Cutting Mandrels and Cutters Made of W04 Material (Alle)

Download
(PDF, 2 MB)
L_TC_TC-W46-Cutting-Mandrels-and-Cutters_V1-2_EN.pdf
Cutting Mandrels Made of W46 Material (Alle)

Download
(PDF, 2 MB)
L_TC_Wafios-Torsion-Cut_V1-2_DE.pdf
WAFIOS Torsion Cut Werkzeugsystem (Deutsch)

Download
(PDF, 591 KB)
L_TC_Wafios-Torsion-Cut_V1-2_EN.pdf
WAFIOS Torsion Cut Tool System (Alle)

Download
(PDF, 610 KB)
L_TC_Winding-roller-with-holder_V1-2_DE.pdf
Winderolle mit Halter – die Alternative zu starren Windewerkzeugen (Deutsch)

Download
(PDF, 190 KB)
L_TC_Winding-roller-with-holder_V1-2_EN.pdf
Coiling Roller with Mounting Fixture – The Alternative to Stationary Coiling Tools (Alle)

Download
(PDF, 190 KB)
L_FUL16plus_DE_V1-1.pdf
FUL 16+ (Deutsch)

Download
(PDF, 3 MB)
L_FUL16plus_EN_V1-1.pdf
FUL 16+ (Alle)

Download
(PDF, 3 MB)
L_AHF50-150_V1-2_DE_HQ.pdf
AHF 50, AHF 150 (Deutsch)

Download
(PDF, 1 MB)
L_AHF50-150_V1-2_EN_HQ.pdf
AHF 50, AHF 150 (Alle)

Download
(PDF, 1 MB)