Maschinenvergleich FSE- & F-Baureihe

  • Modular gestaltbare Ausstattungsklassen, maßgeschneidert nach Kundenwunsch
  • Kostenreduzierung durch Modulbauweise, Energieeffizienz und Rüstzeitoptimierung
  • Geringer Platzbedarf der Maschine ermöglicht eine optimierte Fabrikplanung und Werkslogistik
  • Wirtschaftliche Leistung dank hoher Verfügbarkeit
  • Flexibilität dank platzsparendem Maschinenkonzept

Bitte wählen Sie den Drahtdurchmesser [mm]

0.12 mm6.94 mm14 mm

F 08 von 0.12
bis 0.8 mm

Drahtdurchmesser 0.12 - 0.8 mm
Drahtdurchmesser bei Wm 6 bzw. Rm max. 2600 N/mm² 0.12 - 0.6 mm
Drahtdurchmesser bei Wm 4 bzw. Rm max. 2300 N/mm² 0.6 - 0.8 mm
Federaussendurchmesser max. 20 mm
Winderichtung rechts und links
Einzugsgeschwindigkeit max. 160 m/min

F 12 von 0.2
bis 1.2 mm

Drahtdurchmesser 0.2 - 1.2 mm
Drahtdurchmesser bei Wm 4 bzw. Rm max. 2500 N/mm² 0.2 - 1.1 mm
Drahtdurchmesser bei Wm 5 bzw. Rm max. 1800 N/mm² 1.1 - 1.2 mm
Federaussendurchmesser max. 30 mm
Winderichtung rechts und links
Einzugsgeschwindigkeit max. 160 m/min

F 18 von 0.35
bis 1.8 mm

Drahtdurchmesser 0.35 - 1.8 mm
Drahtdurchmesser bei Wm 4 bzw. Rm max. 2300 N/mm² 0.35 - 1.6 mm
Drahtdurchmesser bei Wm 4 bzw. Rm max. 1900 N/mm² 1.6 - 1.8 mm
Federaussendurchmesser max. 40 mm
Winderichtung rechts und links
Einzugsgeschwindigkeit max. 140 m/min

FSE 143 von 6.1
bis 14 mm

Drahtdurchmesser 6.1 - 14 mm
Drahtfestigkeit Rm=2000 N/mm²
Wickelverhältnis ≥4
Federaussendurchmesser max. 240 mm.
Winderichtung rechts
Einzugsgeschwindigkeit max. 70 m/min

F 30 von 0.7
bis 3 mm

Drahtdurchmesser 0.7 - 3 mm
Drahtdurchmesser bei Wm 4 bzw. Rm max. 2000 N/mm² 0.7 - 2.5 mm
Drahtdurchmesser bei Wm 6 bzw. Rm max. 1800 N/mm² 2.5 - 3 mm
Federaussendurchmesser max. 65 mm
Winderichtung rechts und optional links
Einzugsgeschwindigkeit max. 135 m/min

F 4 von 1.5
bis 4.5 mm

Drahtdurchmesser 1.5 - 4.5 mm
Drahtdurchmesser bei Rm max. 2000 N/mm² 1.5 - 4 mm
Drahtdurchmesser bei Rm max. 1800 N/mm² 1.5 - 4.5 mm
Federaussendurchmesser max. 100 mm
Winderichtung rechts und links
Einzugsgeschwindigkeit max. 100 m/min

F 6 von 2.6
bis 7 mm

Drahtdurchmesser 2.6 - 7 mm
Drahtdurchmesser bei Rm max. 2000 N/mm² 2.1 - 6 mm
Drahtdurchmesser bei Rm max. 1800 N/mm² 2.1 - 7 mm
Federaussendurchmesser max. 130 mm
Winderichtung rechts und links
Einzugsgeschwindigkeit max. 100 m/min

F 08

  • Vollwertige Druckfedermaschine in der Basisausstattung, modular erweiterbar
  • Stückkostenoptimierte Druckfederproduktion
  • Hohe Verfügbarkeit dank zuverlässiger, bewährter Maschinensteuerung und wartungsfreundlichem Design
  • Leistungsgesteigerte Entwicklung mit erweitertem Einsatzspektrum
  • Präzision mit modernster Meß- und Steuerungstechnik
  • Kürzere Einrichtzeit und mehr Bedienkomfort
F08_-400x400pixel_300ppi.png

Weiterführende Informationen

L_AHP1-AHP6_Folder_V1-2_DE.pdf
AHP 1 - AHP 6 (Deutsch)

Download
(PDF, 428 KB)
L_AHP_Folder-AHP-Residual-Weight-Detection_V1-1_DE.pdf
AHP Residual-Weight-Detection (Deutsch)

Download
(PDF, 125 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_DE.pdf
AHT-Series (Deutsch)

Download
(PDF, 101 KB)
L_FUL16-FUL166_V1-1_DE.pdf
FUL 16plus - FUL 166 (Deutsch)

Download
(PDF, 1 MB)
L_FUL175_Folder-FUL175_V1-1_ALL.pdf
FUL 175 (Deutsch)

Download
(PDF, 94 KB)
L_FUL226_V1-2_DE.pdf
FUL 226 (Deutsch)

Download
(PDF, 590 KB)
L_FUL226_V1-2_EN.pdf
FUL 226 (Alle)

Download
(PDF, 590 KB)
L_FUL_iQopticut_V1-1_DE.pdf
iQopticut (Deutsch)

Download
(PDF, 1 MB)
L_GH46_Pay-Off_V1-1__DE.pdf
GH 46 (Deutsch)

Download
(PDF, 64 KB)
L_H3-H3V-H7-Folder_DE.pdf
H3 - H3V - H7 (Deutsch)

Download
(PDF, 120 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_DE.pdf
Werkzeuglösungen für große Federwindemaschinen (Deutsch)

Download
(PDF, 171 KB)
L_TC_TC-W46-Cutting-Mandrels-and-Cutters_V1-2_DE.pdf
Abschneidedorne aus Werkstoff W46 (Deutsch)

Download
(PDF, 2 MB)
L_TC_Wafios-Torsion-Cut_V1-2_DE.pdf
WAFIOS Torsion Cut Werkzeugsystem (Deutsch)

Download
(PDF, 591 KB)
L_AHP1-AHP6_Folder_V1-2_EN.pdf
AHP 1 - AHP 6 (Alle)

Download
(PDF, 426 KB)
L_AHT-Series_Folder-AHT-Series_V1-1_EN.pdf
AHT-Series (Alle)

Download
(PDF, 102 KB)
L_F-Series_Folder-F-Series_V1-1_DE.pdf
F-Series (Deutsch)

Download
(PDF, 776 KB)
L_F-Series_Folder-F-Series_V1-1_EN.pdf
F-Series (Alle)

Download
(PDF, 736 KB)
L_F30_Folder-F30_V1-1_DE.pdf
F30 (Deutsch)

Download
(PDF, 298 KB)
L_F30_Folder-F30_V1-1_EN.pdf
F30 (Alle)

Download
(PDF, 297 KB)
L_FSE143_Folder-FSE143_V1-1_DE.pdf
FSE 143 (Deutsch)

Download
(PDF, 348 KB)
L_FSE143_Folder-FSE143_V1-1_EN.pdf
FSE 143 (Alle)

Download
(PDF, 346 KB)
L_FUL-FSE_iQautopitch_V1-4_DE.pdf
iQautopitch (Deutsch)

Download
(PDF, 1 MB)
L_FUL-FSE_iQautopitch_V1-4_EN.pdf
iQautopitch (Alle)

Download
(PDF, 1 MB)
L_FUL-FSE_iQspring2FUL_V1-2_DE.pdf
iQspring2FUL (Deutsch)

Download
(PDF, 857 KB)
L_FUL-FSE_iQspring2FUL_V1-2_EN.pdf
iQspring2FUL (Alle)

Download
(PDF, 852 KB)
L_FUL-F_iQbestspeed_V1-3_DE.pdf
iQbestspeed (Deutsch)

Download
(PDF, 1 MB)
L_FUL-F_iQbestspeed_V1-3_EN.pdf
iQbestspeed (Alle)

Download
(PDF, 1 MB)
L_FUL16-FUL166_V1-1_EN.pdf
FUL 16plus - FUL 166 (Alle)

Download
(PDF, 1 MB)
L_FUL26_-FUL36__V1-2_DE.pdf
FUL 26 - FUL 36 (Deutsch)

Download
(PDF, 158 KB)
L_FUL26_-FUL36__V1-2_EN.pdf
FUL 26 - FUL 36 (Alle)

Download
(PDF, 158 KB)
L_FUL166_Folder-FUL166_V1-1_DE.pdf
FUL 166 (Deutsch)

Download
(PDF, 259 KB)
L_FUL166_Folder-FUL166_V1-1_EN.pdf
FUL 166 (Alle)

Download
(PDF, 258 KB)
L_FUL175_Folder-FUL175_V1-1_ALL.pdf
FUL 175 (Alle)

Download
(PDF, 94 KB)
L_FUL183_Folder-FUL183_V1-1_DE.pdf
FUL 183 (Deutsch)

Download
(PDF, 66 KB)
L_FUL183_Folder-FUL183_V1-1_EN.pdf
FUL 183 (Alle)

Download
(PDF, 65 KB)
L_FUL203_Folder-FUL203_V1-1_DE.pdf
FUL 203 (Deutsch)

Download
(PDF, 66 KB)
L_FUL203_Folder-FUL203_V1-1_EN.pdf
FUL 203 (Alle)

Download
(PDF, 65 KB)
L_FUL226_V1-2_DE.pdf
FUL 226 (Deutsch)

Download
(PDF, 590 KB)
L_FUL226_V1-2_EN.pdf
FUL 226 (Alle)

Download
(PDF, 590 KB)
L_FUL_iQcontrol_V1-4_DE.pdf
iQcontrol (Deutsch)

Download
(PDF, 920 KB)
L_FUL_iQcontrol_V1-4_EN.pdf
iQcontrol (Alle)

Download
(PDF, 918 KB)
L_FUL_iQopticut_V1-1_EN.pdf
iQopticut (Alle)

Download
(PDF, 1 MB)
L_GH46_Pay-Off_V1-1_EN.pdf
GH46 (Alle)

Download
(PDF, 64 KB)
L_GH46_Pay-Off_V1-1__DE.pdf
GH 46 (Deutsch)

Download
(PDF, 64 KB)
L_H3-H3V-H7-Folder_DE.pdf
H3 - H3V - H7 (Deutsch)

Download
(PDF, 120 KB)
L_H3-H3V-H7_Folder_EN.pdf
H3 - H3V - H7 (Alle)

Download
(PDF, 120 KB)
L_TC_Coating-Tooling_V1-1_DE.pdf
Probleme bei der Verarbeitung von Edelstahl? (Deutsch)

Download
(PDF, 87 KB)
L_TC_Coating-Tooling_V1-1_EN.pdf
Problems in the processing of stainless steel? (Alle)

Download
(PDF, 87 KB)
L_TC_Coiling-Pins-with-Insert_V1-2_DE.pdf
Windestifte mit Einsatz – Die flexible Alternative (Deutsch)

Download
(PDF, 188 KB)
L_TC_Coiling-Pins-with-Insert_V1-2_EN.pdf
Coiling Pins with Insert - The Flexible Alternative (Alle)

Download
(PDF, 230 KB)
L_TC_Coiling-roller-with-holder_V1-2_EN.pdf
Coiling Roller with Mounting Fixture – The Alternative to Stationary Coiling Tools (Alle)

Download
(PDF, 190 KB)
L_TC_Cutting-Mandrel-W04_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Deutsch)

Download
(PDF, 416 KB)
L_TC_Cutting-Mandrel-W04_V1-2_EN.pdf
Cutting Mandrels and Cutters Made of W04 Material (Alle)

Download
(PDF, 416 KB)
L_TC_Cutting-Mandrel-W46_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Deutsch)

Download
(PDF, 364 KB)
L_TC_Cutting-Mandrel-W46_V1-2_EN.pdf
Cutting Mandrels Made of W46 Material (Alle)

Download
(PDF, 364 KB)
L_TC_Cutting-Tool-Holder-with-Insert_V1-3_DE.pdf
Messerhalter mit Einsatz – Rotationsschnitt (Deutsch)

Download
(PDF, 251 KB)
L_TC_Cutting-Tool-Holder-with-Insert_V1-3_EN.pdf
Cutting Tool Holder with Insert – Rotary Cut (Alle)

Download
(PDF, 250 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_DE.pdf
Einzugswalzen aus Werkstoff W01 und W03 – Auswahl mit System (Deutsch)

Download
(PDF, 124 KB)
L_TC_Feed-Rollers-W01-W03_V1-1_EN.pdf
Feed rollers made of W01 and W03 material – system-based selection (Alle)

Download
(PDF, 123 KB)
L_TC_PKD_Coiling_Pins_V01-1_DE.pdf
Windestifte mit PKD – Edelstahldraht wirtschaftlich verarbeite (Deutsch)

Download
(PDF, 985 KB)
L_TC_PKD_Coiling_Pins_V01-1_EN.pdf
Coiling Pins with PCD Insert - Processing Stainless Steel Wire Economically (Alle)

Download
(PDF, 978 KB)
L_TC_Regrinding-cutting-mandrels_V1-2_DE.pdf
RE-GRINDING lohnt sich- bis zu 70% Kostenersparnis ihr Nachschleifservice für Abschneidedorne (Deutsch)

Download
(PDF, 282 KB)
L_TC_Regrinding-cutting-mandrels_V1-2_EN.pdf
RE-GRINDING pays off - Cost savings of up to 70% Your regrinding service for cutting mandrels (Alle)

Download
(PDF, 278 KB)
L_TC_RotaryRollerWireGuide_V1-1_DE.pdf
Drehbarer Rollendrahtführung – Optimiert für die Verarbeitung von Profildraht (Deutsch)

Download
(PDF, 751 KB)
L_TC_RotaryRollerWireGuide_V1-1_EN.pdf
Rotary Roller Wire Guide - Optimized for Processing Profiled Wire (Alle)

Download
(PDF, 750 KB)
L_TC_Rotatable-Coiling-Insert-RCI_V1-2_DE.pdf
Drehbarer Windeeinsatz – RCI (Rotable Coiling Insert) (Deutsch)

Download
(PDF, 505 KB)
L_TC_Rotatable-Coiling-Insert-RCI_V1-2_EN.pdf
Rotatable-Coiling-Insert-RCI (Alle)

Download
(PDF, 501 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_DE.pdf
Werkzeuglösungen für große Federwindemaschinen (Deutsch)

Download
(PDF, 171 KB)
L_TC_TC-Tooling-Solutions-Spring-Coilers_V1-2_EN.pdf
Tool solutions for large spring coiling machines (Alle)

Download
(PDF, 188 KB)
L_TC_TC-W04-Cutting-Mandrels-and-Cutters_V1-2_DE.pdf
Abschneidedorne und –messer aus Werkstoff W04 (Deutsch)

Download
(PDF, 2 MB)
L_TC_TC-W04-Cutting-Mandrels-and-Cutters_V1-2_EN.pdf
Cutting Mandrels and Cutters Made of W04 Material (Alle)

Download
(PDF, 2 MB)
L_TC_TC-W46-Cutting-Mandrels-and-Cutters_V1-2_EN.pdf
Cutting Mandrels Made of W46 Material (Alle)

Download
(PDF, 2 MB)
L_TC_Wafios-Torsion-Cut_V1-2_DE.pdf
WAFIOS Torsion Cut Werkzeugsystem (Deutsch)

Download
(PDF, 591 KB)
L_TC_Wafios-Torsion-Cut_V1-2_EN.pdf
WAFIOS Torsion Cut Tool System (Alle)

Download
(PDF, 610 KB)
L_TC_Winding-roller-with-holder_V1-2_DE.pdf
Winderolle mit Halter – die Alternative zu starren Windewerkzeugen (Deutsch)

Download
(PDF, 190 KB)
L_TC_Winding-roller-with-holder_V1-2_EN.pdf
Coiling Roller with Mounting Fixture – The Alternative to Stationary Coiling Tools (Alle)

Download
(PDF, 190 KB)
L_FUL16plus_DE_V1-1.pdf
FUL 16+ (Deutsch)

Download
(PDF, 3 MB)
L_FUL16plus_EN_V1-1.pdf
FUL 16+ (Alle)

Download
(PDF, 3 MB)
L_AHF50-150_V1-2_DE_HQ.pdf
AHF 50, AHF 150 (Deutsch)

Download
(PDF, 1 MB)
L_AHF50-150_V1-2_EN_HQ.pdf
AHF 50, AHF 150 (Alle)

Download
(PDF, 1 MB)