Machine comparison KEB Series
- High-end machines for the production of high-strength chains in continuous operation
- Output is increased by 10% (KEB x.2)
- Dimensionally accurate chain with tightest bending tolerances evenly bent in continuous operation
- Robust machine design for the production of high-strength chains over a long period of time
- Safety devices for protecting machine parts and tools
High-end cold-forming process for high-strength chains - KEB and KER series
Chain bending machines of the KEB and KER series are used to cold-bend round steel link chains. Wire material is fed in from the wire coil. The bent chain link can then immediately be electrically welded on a separate machine.
Please select wire diameter [mm]
KEB 3.1
from 2
to 6.5 mm
| Wire diameter | 2 - 6.5 mm |
| at max. 750 N/mm² | 2 - 6.5 mm |
| at max. 500 N/mm² | 2 - 6.5 mm |
| Wire feed length | max. 120 mm |
| Inner link length (pitch) | max. 42 mm |
| Output, chain links | 120 - 150 pcs./min |
KEB 4.1
from 4
to 10 mm
| Wire diameter | 4 - 10 mm |
| at max. 750 N/mm² | 4 - 10 mm |
| at max. 500 N/mm² | 4 - 11 mm |
| Wire feed length | max. 200 mm |
| Inner link length (pitch) | max. 66 mm |
| Output, chain links | 65 - 90 pcs./min |
KEB 4.2
from 5
to 10 mm
| Wire diameter | 5 - 10 mm |
| at max. 1,000 N/mm² | 5 - 9 mm |
| at max. 900 N/mm² | 5 - 10 mm |
| Wire feed length | max. 155 mm |
| Inner link length (pitch) | 14.5 - 52 mm |
| Output, chain links | 60 - 75 pcs./min |
KEB 5.1
from 6
to 14 mm
| Wire diameter | 6 - 14 mm |
| at max. 750 N/mm² | 6 - 13 mm |
| at max. 500 N/mm² | 6 - 14 mm |
| Wire feed length | max. 240 mm |
| Inner link length (pitch) | max. 82 mm |
| Output, chain links | 55 - 80 pcs./min |
KEB 7.2
from 10
to 18 mm
| Wire diameter | 10 - 18 mm |
| at max. 1,000 N/mm² | 10 - 16 mm |
| at max. 800 N/mm² | 10 - 18 mm |
| Wire feed length | max. 280 mm |
| Inner link length (pitch) | 29 - 95 mm |
| Output, chain links | 35 - 45 pcs./min |
KEB 8.1
from 12
to 23 mm
| Wire diameter | 12 - 23 mm |
| at max. 750 N/mm² | 12 - 20 mm |
| at max. 500 N/mm² | 12 - 23 mm |
| Wire feed length | max. 340 mm |
| Inner link length (pitch) | max. 100 mm |
| Output, chain links | 15 - 25 pcs./min |
KEB 4.1
- 3-shaft system
- Smooth machine running
- Operations (forward and backward stroke) are positively controlled via cams
- Safety devices for wire feed, chain link blank stop, gripping at the bending mandrel
- Quickly responding clutch and brake combination
- The clamping tools of the wire feed are pneumatically actuated. (KEB 3.1 - KEB 5.1) All other motion sequences are mechanically controlled
- Wire feed and gripping, notching, and closing the tilting tongs occurs hydraulically. (KEB 8.1) All other motion sequences are mechanically controlled
